Budget Machinery deals in
new & used metal cutting machine tools - Vertical borers, cylindrical
grinders, surface grinders, special grinders, lathes, milling machines, drilling
machines, horizontal borers, slotters. Please click on the links below to
see stock details.
Budget Machinery handles worldwide exports from your enquiry to your factory door.
Buying or selling? Contact Budget Machinery NOW!
|Click above & below to go to different areas of the web site & send e mail.|
|Horizontal Borers||Vertical borers||Milling||Drilling||Grinding|
|Slotting, Shaping & Gear machinery||Machine manuals||Tooling||Metrology||Unclassified||Full
on one big page
|Model||SN71 x 4000|
|Diameter over bed (Max)||720mm|
|Diameter over cross slide (Max)||460mm|
|Capacity in gap (max)||960mm x 300mm|
|Length between centres (Max)||4000mm|
|Diameter of hole through spindle||77mm|
|Spindle nose fitting||Din 8 (camlock optional)|
|Spindle speed range||10 - 1600 rpm|
|Number of spindle speeds|
|Main motor output||7.5kW|
|Taper in tailstock||No 5 Morse|
|Operating dimensions||6 metres x 1.5 metres|
|Shipping dimensions||6000 x 1000|
is a machine which has been produced for 6 decades. It is a lathe, it
works, it is accurate, it is simple to operate, it is reliable, it
doesn't take up much space. It is a thoroughbred product from an
experienced company who are still going to be there in 25 years when you
start looking for spare parts.
It shares a lot of features with its bigger more modern brother, the SN710S. If you don't need a big spindle bore or a fast headstock then you should consider one of these and save a lot of money.
The SN55 & SN63 lathes are no longer made. Only the SN71 remains in production. SN55, SN63 & SN71 machines all share a common bed profile, saddle, apron , tailstock & feed gearbox. Only the centre height differs. Therefore the SN71 is a direct & exact equivalent of all the older SN machines. The only spare parts & accessories which are not interchangeable are the steadies.